10. Finishing installation

Start the engine. The engine should be running normally. However, the first start-up after the installation may be a bit longer if the ethanol sensor is installed in the pressure line and fuel line is drained empty. When you have started the engine, observe the installed fuel line connectors and fuel hose. Even a small […]

Read More

3. Disconnecting the fuel line

Attention Ethanol sensor should be installed to a location free from moving parts and high temperatures. Engine movement may cause rubbing to the fuel hose if installed incorrectly. Installing to hot environment may cause melting of the fuel hose which can lead to slipping or leaking of the fuel hose. Clean the fuel line connection […]

Read More

1. Before installation

Before you begin You have accepted the terms of use. The conversion kit is only compatible with gasoline powered cars. The conversion kit is only compatible with high impedance fuel injectors. The conversion kit is not compatible with direct injection engines (FSI, TSI, GDI, etc.). Verify adequate flow rate of the fuel system (E85 requires […]

Read More