Before you begin
- You have accepted the terms of use.
- The conversion kit is only compatible with gasoline powered cars.
- The conversion kit is only compatible with high impedance fuel injectors.
- The conversion kit is not compatible with direct injection engines (FSI, TSI, GDI, etc.).
- Verify adequate flow rate of the fuel system (E85 requires c. 30% higher flow rate).
- Car needs to be in normal operating condition.
- The car’s oxygen sensors needs to operate normally (passed smog inspection).
- The conversion kit is only compatible with 12 V electrical systems.
- Temperature in installation location should be above +5 °C (41 °F). Plastic components may brake.
